Error codes are flashed when there is an issue with your Indramat HDS (Diaxo4) drive. Error codes are usually 4 digit codes beginning with an E or F. The following are the most common error codes seen on a faulty Indramat HDS drive, found on Eco-Drives as well:
#1 Code F208/UL
Description: If a servo motor or a different drive has been changed out for the original unit in the loop, due to troubleshooting or an upgrade.
Solution: This is fairly simple. After powering up and code is registered, hitting reset on the drive and power supply, then cycle power and unit should be functional.